Wire Crimp Pull Testers- Alphatron

DMC Wire Crimp Pull Testers

Tensile Test Systems
For Wire Terminations and Similar Applications

THE DEPENDABLE ALPHA-TEST� SYSTEM
Wire Crimp Pull Testers Alphatron Now available from DMC is a line of Electronics Tensile Test Systems which may be used in conjunction with SPC Programs or other Quality Control disciplines in both OEM and Maintenance applications. The electronic digital readout displays are a fast and reliable source of test data, and in some models the data may be output to a printer or other RS232 compatible device.

The rugged construction and the portable design of these test machines make any of them a superior choice for on-site or laboratory use in an infinite variety of applications. The operation of the equipment is simple yet versatile, and Alphatron will customize the gripping jaws or other components to make test sample installation and removal an easy task.

Alphatron Wire Crimp Pull Testers Models are available with output display reading Pounds, Newtons and/or Kilograms to conform with the requirements of the users system. Units are available for either 115 or 230 volt power input.

It's only natural that the company which supplies the best wire termination tools and equipment would add the very best Digital Tensile Tester to further meet the demand for fewer sources and improved support through a wider range of user needs.

Alphatron Wire Crimp Pull Testers HPT200 Also consult DMC for Model HPT200 hand-held pull tester which blends the accuracy and rugged design of the Alphatron pull tester into a portable battery powered unit.

Minimum Tensile Strength Requirements (For Reference Only)
Wire Size (AWG)	MIL-T-7928 (LBS)	UL 486 (LBS)
26	7	-
24	10	-
22	15	8
20	19	13
18	38	20
16	50	30
14	70	50
12	110	70
10	150	80
8	225	90
6	300	100
4	400	140
2	550	180
1	650	200
0	700	250
00	750	300
000	825	350
0000	875	450

SPECIFICATIONS FOR THE MPT-250B MOTORIZED WIRE CRIMP PULL TESTER

Rate of Pull: 1 to 10"/min.
Push Button Selectable in 10 1"/min. Increments.
±1/8"/min. @ 1-5"/min. Rate of Pull
±1/4"/min. @ 6-10"/Min. Rate of Pull
Auto- Stop at Wire/Crimp Break Point
Auto Return to Start Position in Reset Mode
15 Position Slotted Lower Terminal Grip

MODEL MPT-250B MPT-250B.PDF	MPT-250B OPTIONAL FEATURES: • Adjustable Load Set Point for Motor Stop (optional - P/N 15-1547) • 230 VAC 50/60 Hz Power (built in) OPTIONAL ACCESSORIES: • Self-Tightening Cam-Type Lower Grip (P/N 15-3202) • Heavy-Duty Swivel Lockdown Upper Grip (P/N 15-3032 and 15-0080) • Ring Terminal Lower Grip (P/N 15-0066) • Custom Grips
PT-150B PT-150B.PDF	PT-150B OPTIONAL FEATURES: • 230 VAC 50/60 Hz Power (P/N 15-7004) ACCESSORY GRIPS: • Ring Terminal Lower Grip (P/N 15-0066) • Right Angle Terminal Lower Grip (P/N 15-3042) • 15 Position Slotted Terminal Lower Grip (P/N 15-3087) • Extra Wide Self-Tightening Upper Grip (P/N 15-3109) • Extra Wide Self-Tightening Lower Grip (P/N 15-3108)
MODEL HPT-200 HPT-200.PDF	HPT-200 OPTIONAL FEATURES: • Consult Factory

Solutions

Alphatron Wire Crimp Pull Testers Wire Grips Wire Grips - DMC offers many terminal grip options to meet individual testing needs.
Custom Options - Pound, Newton, and Kilogram readouts are available. Constant Force allows for non-destructive pull tests typically performed in accordance with UL 486.