|
FEATURES
- 3 Phase Frequency Converter &
- 3 Phase Rectified D.C.
- Spot Weld-Seam Weld-Rollspot Weld
- Fully Programmable 16 Weld Schedules
- Pulsating Heat Control
- Programmable Forge Control
- Programmable Weld PSI
- Programmable Forge PSI
- Programmable Hi-Low Weld PSI
- Programmable Hi-Low Limit Forge PSI
- Programmable Motor Speed
- Programmable First Spot Heat % In Seam
- Intermittent Drive Motor On/Off Control
- 5 Years Memory Retention Without Power
- Scanner Interlock
- RS232 Interface
|
SPECIFICATIONS
- INPUT POWER: 200 VAC to 480 VAC 60 Hz
- AC OUTPUT TO VALVES: 115 VAC 150 VA
- Solid State Contactors Available in Ranges from 300 Amps
to 3200 Amps
- Ignition Firing Module to Fire Ignitrons Size A through
E
- Solid State Relay to Operate Squeeze Valve in Spot - Seam
- Rollspot Mode
- Solid State Relay to Turn On Motor or Air Brake in Seam
or Rollspot Mode
- Dual Pilot Air Pressure Regulator
- Dual Air Volume Booster 150 CFM
- DC Motor Controller 0 - 90 V or 0 - 180 V .5 HP to 2 HP
- Retraction and Two Stage Foot Switch Input
- Floating Input/Output to Central Interlock Scanner
- Visual Peripheral Diagnostics
- RS232 Connector to Upload and Download Weld Schedules to
Laptop
- Remote Control Box Model 325A with the following switches:
Repeat, Weld, Tip Dress, Positive - Alternate - Negative Polarity,
Seam - Spot - Roll, Next Weld Schedule (quick selection between
two weld schedules), Program Lock Key, One of Sixteen Weld
Schedule Selector Switch
|
